Wizards > Application Firewall Wizard

The App Rules wizard provides safe configuration for many common use cases, but not for everything. If at any time during the wizard you are unable to find the options that you need, you can click Cancel and proceed using manual configuration. See About App Rules and App Control Advanced , for more information on manual configuration.

To use the wizard to configure app rules, perform the following steps:

1	Login to the SonicWALL security appliance.

2	In the SonicWALL banner at the top of the screen, click the Wizards icon. The wizards Welcome screen displays.

3	Select the App Rules Wizard radio button and then click Next.

4	In the App Rules Wizard Introduction screen, click Next.

5	In the App Rules Policy Type screen, click a selection for the policy type, and then click Next.

You can choose among SMTP, incoming POP3, Web Access, or FTP file transfer. The policy that you create will only apply to the type of traffic that you select. The next screen will vary depending on your choice here.

6	In the Select <your choice> Rules for App Rules Policy screen, select a policy rule from the choices supplied, and then click Next.

Depending on your choice in the previous step, this screen is one of four possible screens:

•	Select SMTP Rules for App Rules Policy

•	Select POP3 Rules for App Rules Policy

•	Select Web Access Rules for App Rules Policy

•	Select FTP Rules for App Rules Policy

7	The screen displayed here will vary depending on your choice of policy rule in the previous step. For the following policy rules, the wizard displays the Set App Rules Object Content screen on which you can select the traffic direction to scan, and the content or keywords to match.

•	All SMTP policy rule types except Specify maximum email size

•	All POP3 policy rule types

•	All Web Access policy rule types

•	All FTP policy types except Make all FTP access read-only and Disallow usage of SITE command

In the Set App Rules Object Content screen, perform the following steps:

8	In the Direction drop-down list, select the traffic direction to scan from the drop-down list. Select one of Incoming, Outgoing, or Both.

9	Do one of the following:

NOTE: If you selected a choice with the words except the ones specified in the previous step, content that you enter here will be the only content that does not cause the action to occur.

•	In the Content text box, type or paste a text or hexadecimal representation of the content to match, and then click Add. Repeat until all content is added to the List text box.

•	To import keywords from a predefined text file that contains a list of content values, one per line, click Load From File.

10	Click Next.

If you selected a policy type in the previous step that did not result in the Set App Rules Object Content screen with the standard options, the wizard displays a screen that allows you to select the traffic direction, and certain other choices depending on the policy type.

11	In the Direction drop-down list, select the traffic direction to scan.

12	SMTP: In the Set Maximum Email Size screen, in the Maximum Email Size text box, enter the maximum number of bytes for an email message.

13	Web Access: In the special-case Set App Rules Object Content screen, the Content text box has a drop-down list with a limited number of choices, and no Load From File button is available. Select a browser from the drop-down list.

14	FTP: In the special-case Set App Rules Object Content screen, you can only select the traffic direction to scan.

15	Click Next.

16	In the App Rules Action Type screen, select the action to take when matching content is found in the specified type of network traffic, and then click Next.

You will see one or more of the following choices depending on the policy type, which is shown in parentheses here for reference:

•	Blocking Action - block and send custom email reply (SMTP)

•	Blocking Action - block without sending email reply (SMTP)

•	Blocking Action - disable attachment and add custom text (POP3)

•	Blocking Action - custom block page (Web Access)

•	Blocking Action - redirect to new location (Web Access)

•	Blocking Action - reset connection (Web Access, FTP)

•	Blocking Action - add block message (FTP)

•	Add Email Banner (append text at the end of email) (SMTP)

•	Log Only (SMTP, POP3, Web Access, FTP)

17	In the App Rules Action Settings screen (if it is displayed), in the Content text box, type the text or URL that you want to use, and then click Next.

The App Rules Action Settings screen is only displayed when you selected an action in the previous step that requires additional text. For a Web Access policy type, if you selected an action that redirects the user, you can type the new URL into the Content text box.

18	In the Select Name for App Rules Policy screen, in the Policy Name text box, type a descriptive name for the policy, and then click Next.

19	In the Confirm New App Rules Policy Settings screen, review the displayed values for the new policy and do one of the following:

•	To create a policy using the displayed configuration values, click Accept.

•	To change one or more of the values, click Back.

In the App Rules Policy Wizard Complete screen, to exit the wizard, click Close.