Configuring Automatic Proxy Forwarding (Web Only)


	NOTE: To enable Web Proxy, enable CFS on the related zones where clients are from.

To configure Automatic Proxy Forwarding (Web Only):

Connect the Web proxy server to a hub.

Connect the hub to the firewall WAN or DMZ port.


	NOTE: The proxy server must be located on the WAN or DMZ; it can not be located on the LAN.

Go to Network > Web Proxy.

Under Automatic Proxy Forwarding (Web Only), enter the name or IP address of the proxy server in the Proxy Web Server (name or IP address) field.

Enter the proxy IP port in the Proxy Web Server Port field.

Select the Bypass Proxy Servers Upon Proxy Server Failure checkbox to have clients access the Internet directly if the web proxy server becomes unavailable. This option is disabled by default.


	NOTE: The Bypass Proxy Servers Upon Proxy Server Failure checkbox allows clients behind the firewall to bypass the Web proxy server if it becomes unavailable. Instead, the client’s browser accesses the Internet directly as if a Web proxy server is not specified.

Select Forward Public Zone Client Requests to Proxy Server to force clients on public zones to use the proxy server as well. This option is disabled by default.

Click Accept.

After the firewall has been updated, a message confirming the update is displayed at the bottom of the page.