3G/4G PC Card Support

To use the 3G/4G interface you must have a 3G/4G PC card and a contract with a wireless service provider. A 3G/4G service provider should be selected based primarily on the availability of supported hardware. SonicOS (3.6 and later versions) supports the 3G/4G PC cards listed online at:

http://www.SonicWALL.com/us/products/cardsupport.html

3G/4G Wireless WAN Service Provider Support

SonicOS supports the following 3G/4G Wireless network providers (this list is subject to change):

•

AT&T

•

H3G

•

Orange

•	Sprint PCS Wireless

•	Telecom Italia Mobile

•	Telefonica

•

T-Mobile

•

TDC Song

•	Verizon Wireless

•

Vodafone

3G/4G Prerequisites

Before configuring the 3G/4G interface, you must complete the following prerequisites:

•	Purchase a 3G/4G service plan from a supported third-party wireless provider

•	Configure and activate your 3G/4G card

•	Insert the 3G/4G card into the Dell SonicWALL appliance before powering on the Dell SonicWALL security appliance.

NOTE: The 3G/4G card should only be inserted or removed when the Dell SonicWALL security appliance is powered off.

For information on configuring these prerequisites, see the Dell SonicWALL Getting Started Guide for your model.

The following sections describe how to configure the U0/U1/M0 interface for the 3G/4G card on the Dell SonicWALL appliance:

•	3G/4G > Status

•	3G/4G/Modem > Settings

•	3G/4G > Advanced

•	3G/4G > Connection Profiles

•	3G/4G > Data Usage

•	Enabling the U0/U1/M0 Interface

Most of the 3G/4G settings can also be configured on the Network > Interfaces page. 3G/4G Connection Profiles can only be configured on the 3G/4G > Connection Profiles page.