Configuring DSCP Mapping

You can configure the DSCP mapping by setting the priority levels for DSCP values 0 through 63. The Switching > Layer 2 QoS page also provides a Reset DSCP Remap button to reset the priority levels back to the default, which is “Normal.”

To configure DSCP mapping, complete the following steps:

1	To show the DSCP Remap table, click Hide/Show next to the DSCP Remap Table heading. The priority settings for all DSCP values, 0 - 63, are displayed.

 

2	For each DSCP value (0 - 63) that you want to change, select one of the following from the Priority drop-down list:

•

Low

•

Normal

•

High

•

Highest

3	Click Apply. The DSCP Remap table is hidden, but if you show it again you will see the updated priority settings.

4	To reset all DSCP mapping back to the default, Normal, click Reset DSCP Remap and then click OK in the confirmation dialog box.