Configuring the SSL VPN Client Address Range

The SSL VPN Client Address Range defines the IP address pool from which addresses are assigned to remote users during NetExtender sessions. The range needs to be large enough to accommodate the maximum number of concurrent NetExtender users you wish to support plus one (for example, the range for 15 users requires 16 addresses, such as 192.168.200.100 to 192.168.200.115).

NOTE: The range must fall within the same subnet as the interface to which the SRA appliance is connected, and in cases where there are other hosts on the same segment as the SRA appliance, it must not overlap or collide with any assigned addresses.

To configure the SSL VPN Client Address Range, complete the following steps:

3	Navigate to the SSL VPN > Client Settings page.In the NetExtender Start IP field, enter the first IP address in the client address range.

4	In the NetExtender End IP field, enter the last IP address in the client address range.

5	In the DNS Server 1 field, enter the IP address of the primary DNS server, or click the Default DNS Settings to use the default settings.

6	(Optional) In the DNS Server 2 field, enter the IP address of the backup DNS server.

7	(Optional) In the DNS Domain field, enter the domain name for the DNS servers.

8	In the User Domain field, enter the domain name for the users. The value of this field must match the domain field in the NetExtender client.

9	(Optional) In the WINS Server 1 field, enter the IP address of the primary WINS server.

10	(Optional) In the WINS Server 2 field, enter the IP address of the backup WINS server.

11	In the Interface pull-down menu, select the interface to be used for SSL VPN services.

NOTE: The IP address range must be on the same subnet as the interface used for SSL VPN services.

12	Click the Zone name at the top of the page to enable SSL VPN access on it with these settings. The indicator should be green for the Zone you want to enable.

13	Click Accept.