Enabling App Control on Network Zones

You must enable App Control on each zone where you want to use App Control Advanced policies to inspect network traffic. A link to the Network > Zones page is provided on the Firewall > App Control Advanced page for convenient navigation.

NOTE: App Control policies are applied to traffic within a network zone only if you enable the App Control Service for that zone. App Rules policies are independent, and not affected by the App Control setting for network zones.

To enable App Control on a network zone:

1	In the TreeControl, select the unit or group to configure.

2	On the Policies tab, on the Firewall > App Control Advanced page, click Network > Zones in the App Control Status section at the top of the page.

3	On the Network > Zones page, click the Edit icon for the desired zone. The Edit Network Zone screen displays.

 

4	Select Enable App Control Service.

5	Click OK. The Modify Task Description and Schedule window displays.

6	A description is automatically added in the Description field. Optionally change the description.

7	For Schedule, select one of the following radio buttons and set any associated fields:

•	Default – Use the default schedule configured for the Agent that manages this unit

•	Immediate – Enable the configuration immediately

•	At – Select the exact time to enable the configuration by using the pull-down lists for the hour, minute, time zone, month, and year. If your GMS deployment includes Agents in different time zones, you can select among them in the time zone pull-down list. Select the date from the calendar.

8	Click Accept to enable the configuration on this schedule. Click Cancel to exit without saving the configuration.