|
2
|
|
3
|
Select whether the SonicWALL appliance will act as an Access Point or a Wireless Client Bridge from the Radio Role list box.
|
|
4
|
To enable Wireless networking on this device, select Enable WLAN Radio.
|
|
5
|
For SonicOS Standard, configure Use Time Constraints to set hours of operation for this wireless device. For SonicOS Enhanced, select the schedule from the Schedule list box.
|
|
6
|
For SonicOS Standard only, optionally select SRA Enforcement and configure the Server Address and Server Port fields to add SRA enforcement to this wireless device.
|
|
7
|
For SonicOS Standard only, select WiFiSec Enforcement to enable WiFiSec security over this wireless device.
|
|
8
|
For SonicOS Standard only, if using WiFiSec Enforcement, you can choose to Require WiFiSec for Site-to-Site VPN Tunnel Traversal. This option is selected by default when enabling both SRA and WiFiSec simultaneously.
|
|
9
|
For SonicOS Standard only, if using WPA encryption, you can choose to Trust WPA traffic as WiFiSec.
|
|
10
|
For SonicOS Standard only, if using WiFiSec enforcement, you can choose Enable WiFiSec Service Exception List. With this check box selected, select a service from the list and click Add.
|
|
11
|
Enter the IP address and subnet mask of the Wireless LAN port in the WLAN IP Address and WLAN Subnet Mask fields.
|
|
12
|
Enter the Service Set Identifier (SSID) or wireless network name in the SSID field (maximum: 32 characters).
|
|
13
|
Select an applicable wireless Radio Mode form the list-box.
|
|
14
|
Select an applicable Country Code from the list-box.
|
|
15
|
Select a wireless channel to use from the Channel list box.
|
|
16
|
When you are finished, click Update. The settings are changed for the selected SonicWALL appliance. To clear all screen settings and start over, click Reset.
|