Configuring SNMP Settings

To configure the SNMP Managers page, complete the following steps:

1	Click the Console tab, expand the Management tree and click SNMP Managers. The SNMP Managers page displays.

 

2	Select the IP address and port of the SNMP Manager from the SNMP Manager IP/Port fields. This field can accept/display IPv4 and IPv6 addresses.

3	Specify the IP addresses of SNMP Hosts to which traps are forwarded in the SNMP Host to forward traps to fields. These fields can accept/display IPv4 and IPv6 addresses.

4	To enable trap forwarding, select Enable SNMP Trap Forwarding.

5	To enable trap email, select Enable SNMP Trap Email.

6	When you are finished, click Update. The settings are changed. To clear the settings and start over, click Reset.