Configuring TCP Acceleration

The Configuration page gives you the option to select the mode, service object, and address object or group that are always excluded from the TCP Acceleration service.

To configure TCP Acceleration, complete the following:

1	Navigate to WAN Acceleration > TCP Acceleration.

 

2	Select Enable TCP Acceleration.

3	Click the TCP Acceleration Mode drop-down, then select a mode from the list:

4	Click the TCP Acceleration Service Object drop-down, then select a service object from the list.

To view a list, create, and edit service objects, navigate to the Network > Address Objects page.

NOTE: The TCP Acceleration Service Object field might be greyed out if the selected TCP Acceleration mode does not support it.

5	Click the Address Objects always excluded from TCP Acceleration drop-down, then select an address object from the list.

To add an address object to the drop-down list, navigate to Network > Address Objects and create new address objects.

6	Click Update.