Configuring the All In One Role

All In One deployments are ideal for managing a small number of SonicWALL appliances or for test environments.

NOTE: SonicWALL recommends that you use a multi-system distributed deployment in production environments, with the database on a dedicated server and the other services on one or more systems. When only one other system is deployed, the Console role should be assigned to it.

The All In One role provides all services utilized by SonicWALL GMS:

•	Syslog Collector

•	Reports Scheduler

•	Update Manager

•	Reports Summarizer

•	SNMP Manager

•

Scheduler

•	Monitoring Manager

•	Web Server

•

Database

•	Flow Server

The All In One role allows Gateway configurations for the following:

•	None— No gateway is specified. If you do not wish to configure a gateway, complete the following:

1	Click None.

 

2	Select HTTP or HTTPS for the MSM Server Protocol.

3	Click the MSM Server Port text-field, then enter the MSM Server port number.

4	Click the Syslog Server Port text-field, then enter the Syslog Server port number.

5	To apply your changes, click Update. To change the settings on this page back to the defaults, click Reset.

•

NAT Device— Use this option when a NAT device is configured as the gateway. The GMS appliance does not have to login to the unit for any reason and all NAT configurations are taken care of by the network Administrator directly through the device’s management interface. To configure the NAT device, complete the following:

6	Select NAT Device.

 

7	Click the NAT Device IP text-field, then enter the NAT Device IP address. This field can accept/display IPv4 and IPv6 addresses.

8	Click the NAT Device Syslog Port text-field, then enter the NAT Device Syslog port number. This is the Syslog port used for Syslogs sent from the managed units.

9	Select HTTP or HTTPS for the MSM Server Protocol.

10	Click the MSM Server Port text-field, then enter the MSM Server port number.

11	Click the Syslog Server Port text-field, then enter the Syslog Server port number.

12	To apply your changes, click Update. To change the settings on this page back to the defaults, click Reset.

•	GMS Gateway— Use this option when a SonicWALL device is acting as a Gateway. Using a SonicWALL appliance is recommended, but can be setup as a NAT Device if all units are managed using SSL. To configure the GMS Gateway, complete the following:

13	Click GMS Gateway.

 

14

If the SonicWALL GMS connects to managed appliances through a GMS gateway, click the GMS Gateway IP text-field, then enter the internal IP address of the device. This field can accept/display IPv4 and IPv6 addresses. If you change the GMS gateway IP address or password, you must also change the settings on this page. To determine if a GMS Gateway is required, see the SonicWALL Getting Started Guide for your product

15	Click the GMS Gateway Port text-field, then enter the management port used to sign into the device.

16	Click the GMS Gateway User text-field, then enter the username used to sign into the device.

17	Click the GMS Gateway Password text-field, then enter the password used to sign into the device.

18	Confirm the GMS Gateway Password you entered.

19	Click the GMS Gateway Syslog Port text-field, then enter the Syslog port used for syslogs sent from the managed units.

20	Select HTTP or HTTPS for the MSM Server Protocol.

21	Click the MSM Server Port text-field, then enter the MSM Server port number.

22	Click the Syslog Server Port text-field, then enter the Syslog Server port number.

23	To apply your changes, click Update. To change the settings on this page back to the defaults, click Reset.