Monitoring Tunnel Status To monitor the status of a VPN tunnel, use the vpnmonitor status command. sgms> vpnmonitor status firewall-sn [type {up | down | all }] Syntax Table 101. Syntax firewall-sn Serial number of the firewall to view. type {up | down | all } Specifies which types of tunnels are displayed (default: all). NOTE: This command causes the SonicWALL appliance to display the first five VPN tunnels. If the SonicWALL appliance has more than five tunnels, enter the vpnmonitor N command to display the next page of results. Example In the following example, the status of each VPN tunnel for the SonicWALL appliance with serial number 004010126FB0 is displayed: sgms> vpnmonitor status 004010126FB0 ----------------------------------------------------------------------------- SA NAME: GroupVPN LAST UPDATED: Mar 22, 2004 Mon [11:49 AM] Tunnel ID Status Destination Address Range MT107998499199600B0D01FDBF8 Down 0.0.0.0 - 0.0.0.0 ----------------------------------------------------------------------------- SA NAME: SGMS-0006B1040148 LAST UPDATED: Mar 22, 2004 Mon [11:49 AM] Tunnel ID Status Destination Address Range MT107998499489000B0D01FDBF8 Up 10.0.14.43 - 10.0.14.43 ----------------------------------------------------------------------------- SA NAME: SGMS-0006B1044046 LAST UPDATED: Mar 22, 2004 Mon [11:49 AM] Tunnel ID Status Destination Address Range MT107998499529000B0D01FDBF8 Up 10.0.14.44 - 10.0.14.44 ----------------------------------------------------------------------------- SA NAME: SGMS-00401012550C LAST UPDATED: Mar 22, 2004 Mon [11:49 AM] Tunnel ID Status Destination Address Range MT107998499428900B0D01FDBF8 Up 10.0.14.45 - 10.0.14.45 ----------------------------------------------------------------------------- Displayed 0 to 4 of 4 rows.
