Viewing SRA Analyzer Logs

Analyzer logs contain detailed information from the system logs on each transaction that occurred on the SRA appliance.

The Log Analyzer allows advanced users to examine raw data for status and troubleshooting information. The Analyzer logs contain detailed information from the system logs on each transaction that occurred on the specified SonicWALL appliance. These logs can be filtered or drilled down to further narrow the focus of the information, allowing analysis of data about alerts, traffic, bandwidth consumption, and so on. The Log Analyzer is only available at the individual unit level.

The SRA Log Analyzer contains information about Initiator and Responder IP addresses, Status Messages, User and Services used, as well as the time and duration of the session.

You can filter the log on IP address, Message, User, or Service.

Clicking hyperlinks on SRA Reports takes you the Analyzer Log view of the information. Log information can be saved by using the Save icon on the Filter Bar for a specific report. This report then appears in the list of Custom Reports.

For more information on the Log Analyzer, refer to Using the Log Analyzer .

Saving System Log Reports

To load the report for later viewing, either:

•	Click Load Custom Report and select from the pull-down list of saved Custom reports.

•	Click on Analyzers > Log Analyzer.

NOTE: The Log Analyzer entries display raw log information for every connection. Depending on the amount of traffic, this can quickly consume a large amount of space in the database. It is highly recommended to be careful when choosing the number of days of information that will be stored. For more information, see Configuring SRA Scheduled Reports on page 867 and Universal Scheduled Reports.

You can also click on the print icon to save a log to PDF of Excel format.

NOTE: Saved system logs are limited in the number of rows that are saved. If saving to PDF, a maximum of 2500 rows are saved. If saving to Excel, a maximum of 10,000 rows are saved.

Viewing the Analyzer Log for a SRA Appliance

To view the Log, complete the following steps:

1	Click the Reports tab.

2	Select a SRA appliance.

3	Expand the Analyzer tree and click on Log Analyzer. The saved Log report page displays.