Network : Network > Interfaces

Configuring Security Services (Unified Threat Management)
The settings that you enable in this section will control what type of malicious traffic you detect in IPS Sniffer Mode. Typically you will want to enable Intrusion Prevention, but you may also want to enable other Security Services such as Gateway Anti-Virus or Anti-Spyware.
To enable Security Services, your SonicWALL must be licensed for them and the signatures must be downloaded from the firewall Data Center. For complete instructions on enabling and configuring IPS, GAV, and Anti-Spyware, see the Security Services section in this guide.
Configuring Logging
You can configure logging on the Log > Settings page to record entries for attacks that are detected by the firewall. For how to enable logging, see Log > Settings .
Connecting the Mirrored Switch Port to a IPS Sniffer Mode Interface
Use a standard Cat-5 Ethernet cable to connect the mirrored switch port to either interface in the Bridge-Pair. Network traffic will automatically be sent from the switch to the firewall where it can be inspected.
Consult the switch documentation for instructions on setting up the mirrored port.
Connecting and Configuring the WAN Interface to the Data Center
Connect the WAN port on the firewall, typically port X1, to your gateway or to a device with access to the gateway. The firewall communicates with the firewall Data Center automatically. For detailed instructions on configuring the WAN interface, see Configuring a WAN Interface .