|
1
|
Click the Add Prefix button to configure an advertising prefix. Advertising prefixes are used for providing hosts with prefixes for on-link determination and Address Autoconfiguration.
|
|
2
|
Enter the Prefix that is to be advertised with the Router Advertisement message.
|
|
3
|
Enter the Valid Lifetime to set the length of time (in minutes) that the prefix is valid for the purpose of on-link determination. A value of “71582789” means the lifetime is infinite.
|
|
4
|
Enter the Preferred Lifetime to set the length of time that addresses generated from the prefix via stateless address autoconfiguration remain preferred. A value of “71582789” means the lifetime is infinite.
|
|
5
|
Optionally click the On-link check box to enable the on-link flag in Prefix Information option, which indicates that this prefix can be used for on-link determination.
|
|
6
|
Optionally click the Autonomous check box to enable the autonomous address-configuration flag in Prefix Information option, which indicates that this prefix can be used for stateless address configuration.
|
|
7
|
Click OK.
|