You can configure the firewall to be managed by ADTRAN Global Management System
(ADTRAN GMS). To configure the firewall for GMS management:
Step 1
|
Select the
Enable Management using GMS
checkbox, then click Configure
. The Configure
GMS Settings
window is displayed.
|
Step 4
|
Select
Send Heartbeat Status Messages Only
to send only heartbeat status instead of log messages.
|
Step 5
|
Select
GMS behind NAT Device
if the GMS Console is placed behind a device using NAT on the network. Type the IP address of the NAT device in the NAT Device IP Address
field.
|
|
•
|
IPSEC Management Tunnel
- Selecting this option allows the firewall to be managed over an IPsec VPN tunnel to the GMS management console. The default IPsec VPN settings are displayed. Select GMS behind NAT Device
if applicable to the GMS installation, and enter the IP address in the NAT Device IP Address
field. The default VPN policy settings are displayed at the bottom of the Configure GMS Settings
window.
|
|
•
|
Existing Tunnel
- If this option is selected, the GMS server and the firewall already have an existing VPN tunnel over the connection. Enter the GMS host name or IP address in the GMS Host Name or IP Address
field. Enter the port number in the Syslog Server Port
field.
|
|
•
|
HTTPS
- If this option is selected, HTTPS management is allowed from two IP addresses: the GMS Primary Agent and the Standby Agent IP address. The firewall also sends encrypted syslog packets and SNMP traps using 3DES and the firewall administrator’s password. The following configuration settings for HTTPS management mode are displayed:
|
The
Download URL
section provides fields for specifying the URL address of a site for downloading the ADTRAN GVC application images.
Manually specify GVC Download URL
- The ADTRAN Global VPN Client (GVC) allow users to connect securely to your network using the GroupVPN Policy on the port they are connecting to. GVC is required for a user to connect to the GroupVPN Policy. Depending on how you have set up your VPN policies, if a user does not have the latest GVC software installed, the user will be directed to a URL to download the latest GVC software.
The default URL displays the ADTRAN Global VPN Client download site. You can point to any
URL where you provide the ADTRAN Global VPN Client application.
If your firmware contains other languages besides English, they can be selected in the
Language Selection
pulldown menu.