Wizards_Public Server

Wizards > Public Server Wizard

1. Start the wizard: In the navigator, click Wizards.
2. Select Public Server Wizard and click Next.
3. Select the type of server from the Server Type list. Depending on the type you select, the available services change. Check the box for the services you are enabling on this server. Click Next
4. Enter the name of the server.
5. Enter the private IP address of the server. Specify an IP address in the range of addresses assigned to zone where you want to put this server. The Public Server Wizard will automatically assign the server to the zone in which its IP address belongs.
6. Click Next.
7. Enter the public IP address of the server. The default is the WAN public IP address. If you enter a different IP, the Public Server Wizard will create an address object for that IP address and bind the address object to the WAN zone.
8. Click Next. The Summary page displays a summary of the configuration you selected in the wizard.
• Server Address Objects - The wizard creates the address object for the new server. Because the IP address of the server added in the example is in the IP address range assigned to the DMZ, the wizard binds the address object to the DMZ zone. It gives the object a name of the name you specified for the server plus “_private”. If you specify an IP in the range of another zone, it will bind the address object to that zone. If you specify an IP address out of the range of any zone you have configured, the wizard will bind the address object to the LAN zone.

Because the server in the example used the default WAN IP address for the Server Public IP Address, the wizard states that it will use the existing WAN address object when constructing policies between the new server and the WAN. If you specify another address, the server will create an object for that address bound to the WAN zone and assign the new address object a name of the name you specified for the server plus “_public”.

• Server Service Group Object - The wizard creates a service group object for the services used by the new server. Because the server in the example is a Web server, the service group includes HTTP and HTTPS. This way, you have a convenient group to refer to when creating or editing access policies for this server.
• Server NAT Policies - The wizard creates a NAT policy to translate the destination addresses of all incoming packets with one of the services in the new service group and addressed to the WAN address to the address of the new server. Therefore, in this example, if a packet with service type of HTTPS comes in addressed to the WAN interface (10.0.93.43), the NAT policy will translate its address to 172.22.2.44.

The wizard also creates a Loopback NAT policy to translate HTTP and HTTPS traffic from inside your network addressed to the WAN IP address back to the address of the mail server.

• Server Access Rules - The wizard creates an access policy allowing all mail traffic service traffic from the WAN zone to the DMZ.
9. Click Accept in the Public Server Configuration Summary page to complete the wizard and apply the configuration to your SonicWALL.
10. The new IP address used to access the new server, internally and externally is displayed in the URL field of the Congratulations window. Click Close to close the wizard.