icon in the upper right corner of the page.Log_logSyslogView
In addition to displaying event messages in the GUI, the Dell SonicWALL security appliance can send the same messages to an external, user-configured Syslog server for viewing. The Syslog message format can be selected in Syslog Settings and the destination Syslog Servers can be specified in the table of Syslog Servers.
SonicWALL Syslog captures all log activity and includes every connection source and destination name and/or IP address, IP service, and number of bytes transferred. The Dell SonicWALL Syslog support requires an external server running a Syslog daemon; the UDP Port is configurable.
Dell SonicWALL has fully compatible Syslog viewers, such as GMS and Analyzer, which can generate useful reports based on received Syslog messages. When GMS or Analyzer has been enabled, the destination hosts are automatically added as one of the Syslog servers. Other Syslog servers may be added as needed, however. Up to seven (7) Syslog servers can be connected to the firewall.
Note See RCF 3164 - The BSD Syslog Protocol for more information.
Note Syslog output may be affected by changes to Event Priority for event, group, or global categories made on the Log > Settings page. For more information, see Configuring Event Attributes Globally.
Note SonicWALL Syslog support requires an external server running a Syslog daemon on a UDP Port. The default port is UDP Port 514, but you can choose a different port.
To display the Dashboard > Log Monitor page, click on the Show Log Monitor icon in the upper right corner of the page.
Topics:
The Log > Syslog page enables you to configure the various settings you want when you send the log to a Syslog server. You can choose the Syslog facility and the Syslog format that you want.
Note If you are using Dell SonicWALL’s Global Management System (GMS) to manage your firewall, the Syslog Format is fixed to Default and the Syslog ID is fixed to firewall. Thus, these fields are greyed-out and can't be modified. All other fields, however, can still be customized as needed.
Configuring Syslog Settings
To configure Syslog settings on your firewall:
1. Go to the Log > Syslog page.
2. The Syslog Facility may be left as the factory default. Optionally, however, in the Syslog Settings section, from the Syslog Facility menu, select the Syslog Facility appropriate to your network:
• Kernel
• User-Level Messages
• Mail System
• System Daemons
• Security/Authorization Messages
• Messages Generated Internally by syslogd
• Line Printer Subsystem
• Network News Subsystem
• UUCP Subsystem
• Clock Daemon (BSP Linux)
• AUTHPRV Security/Authorization Messages
• FTP Daemon
• NTP Subsystem
• Log Audit
• Log Alert
• Clock Daemon (Solaris)
• Local Use 0
• Local Use 1
• Local Use 2
• Local Use 3
• Local Use 4
• Local Use 5
• Local Use 6
• Local Use 7
3. (Optional) If you want to override the Syslog settings and use the reporting software settings if you are using DELL Reporting Software, select the Override Syslog Settings with Reporting Software Settings option.
Note When ViewPoint mode or Analyzer mode is enabled, the Override Syslog Settings with Reporting Software Settings option is automatically selected. When this option is checked, the Syslog format is always reset to the Default format.
4. From the Syslog Format menu list, select the Syslog format that you want. The following Syslog formats are listed:
• Default – Use the default SonicWALL Syslog format.
Note Default Syslog Format is required for GMS or Reporting software.
• WebTrends – Use the WebTrends Syslog format. You must have WebTrends software installed on your system.
• Enhanced Syslog – Use the Enhanced Dell SonicWALL Syslog format.
• ArcSight – Use the ArcSight Syslog format. The Syslog server must be configured with the ArcSight Logger application to decode the ArcSight messages.
When you select Enhanced Syslog or Arcsight, the configure icon 
becomes active. Clicking on the configure icon launches a configuration dialog where you can select the specific settings that you want to log.
5. If you selected:
• Default or WebTrends, go to 13..
• Enhanced Syslog, go to 6..
• ArcSight, go to 10..
6. (Optional) If you selected Enhanced Syslog, click the configure icon 
. The Enhanced Syslog Settings configuration window appears.
7. (Optional) Select the Enhanced Syslog options you want to log. To select all options, click Select All. To deselect all options, click Clear All.
8. Click Save.
9. Go to 13..
10. (Optional) If you selected ArcSight, click the configure icon 
. ArcSight CEF fields Settings configuration window appears.
11. (Optional) Select the ArcSight options that you want to log. To select all options, click Select All. To deselect all options, click Clear All.
12. Click Save.
13. In the Syslog ID box, enter the Syslog ID that you want.
A Syslog ID field is included in all generated Syslog messages, prefixed by “id= ". Thus, for the default value, firewall, all Syslog messages include "id=firewall." The ID can be set to a string consisting of 0 to 32 alphanumeric and underscore characters.
Note The Syslog ID field is fixed to firewall when the Override Syslog Settings with Reporting Software Settings option is enabled, and therefore, cannot be modified.
14. (Optional) Select Enable Event Rate Limiting if you want it. This control allows you to enable rate limiting of events to prevent the internal or external logging mechanism from being overwhelmed by log events. Specify the maximum number of events in the Maximum Events Per Second field; the minimum number is 0, the maximum is 1000, and the default is 1000 per second.
Note Event rate and data rate limiting are applied regardless of Log Priority of individual events.
15. (Optional) Select the Enable Data Rate Limiting if you want it. This control allows you to enable rate limiting of data to prevent the internal or external logging mechanism from being overwhelmed by log events. Specify the maximum number of bytes in the Maximum Bytes Per Second field; the minimum is number is 0, the maximum is 1000000000, and the default is 10000000 bytes per second.
16. (Optional) Select the Enable NDPP Enforcement for Syslog Server if you want it.
17. When you’ve finished setting the Syslog options, click Accept at the top of the page.
To add a Syslog server to the firewall.
1. Go to the Log > Syslog page.
2. In the Syslog Servers section, click Add. The Add Syslog Server dialog appears.
3. Select the Syslog server name or IP address from the Name or IP Address drop-down menu. Messages from the firewall are then sent to the servers.
4. If your Syslog server does not use default port 514, type the port number in the Port Number field.
5. Click OK.
6. Click Accept to save all Syslog Server settings.