Policies_Network_WebProxy_Snwls

Configuring Web Proxy Forwarding Settings

A Web proxy server intercepts HTTP requests and determines if it has stored copies of the requested Web pages. If it does not, the proxy completes the request to the server on the Internet, returning the requested information to the user and also saving it locally for future requests.

Setting up a Web proxy server on a network can be cumbersome, because each computer on the network must be configured to direct Web requests to the server.

If there is a proxy server on the SonicWALL appliance’s network, you can move the SonicWALL appliance between the network and the proxy server, and enable Web Proxy Forwarding. This will forward all WAN requests to the proxy server without requiring the computers to be individually configured.

Configuring Automatic Proxy Forwarding (Web Only)

Note The proxy server must be located on the WAN or DMZ; it can not be located on the LAN.

To configure a Proxy Web sever, select the Network > Web Proxy page.

1. Connect your Web proxy server to a hub, and connect the hub to the SonicWALL appliance’s WAN or DMZ port.

2. Type the name or IP address of the proxy server in the Proxy Web Server (name or IP address) field.

3. Type the proxy IP port in the Proxy Web Server Port field.

4. To bypass the Proxy Servers if a failure occurs, select the Bypass Proxy Servers Upon Proxy Server Failure check box.

5. Select Forward DMZ Client Requests to Proxy Server if you have clients configured on the DMZ.

6. Click Accept. Once the SonicWALL appliance has been updated, a message confirming the update is displayed at the bottom of the browser window.

Bypass Proxy Servers Upon Proxy Failure

If a Web proxy server is specified on the Firewall > Web Proxy page, selecting the Bypass Proxy Servers Upon Proxy Server Failure checkbox allows clients behind the SonicWALL appliance to bypass the Web proxy server in the event it becomes unavailable. Instead, the client’s browser accesses the Internet directly as if a Web proxy server is not specified.

Adding a Proxy Server

To add a Web Proxy server through which users’ web request may come, perform the following:

1. In the User Proxy Settings sections, click the Add button.

2. Enter a proxy server host name or IP address in the text-field, and then click the OK button.

The new proxy server populates in the User Proxy Servers list. This list if full configurable and includes edit, remove, and delete actions.

3. Click the Update button.