Appliance_Deployment_Parameters
Configuring Deployment Settings
This section describes the UMH/UMA Deployment > Settings page, used for Web port, SMTP, and SSL access configuration.
The Deployment > Settings page is identical in both the UMH and UMA management interfaces, except for the left navigation pane which shows the Network menu item on the UMA.
See the following sections:
• Configuring Web Server Settings
Configuring Web Server Settings
Web Server Settings configuration is largely the same on any role:
1. Navigate to Deployment > Settings > Web Server Settings in the /appliance management interface.
2. To use a different port for HTTP access to the Dell SonicWALL Analyzer, type the port number into the HTTP Port field. The default port is 80.
If you enter another port in this field, the port number must be specified when accessing the appliance management interface or SonicWALL GMS management interface. For example, if port 8080 is entered here, the appliance management interface would be accessed with the URL: http://<IP Address>:8080/appliance/.
3. To use a different port for HTTPS access to the Dell SonicWALL Analyzer, type the port number into the HTTPS Port field. The default port is 443.
If you enter another port in this field, the port number must be specified when accessing the appliance management interface or SonicWALL GMS management interface. For example, if port 4430 is entered here, the appliance management interface would be accessed with the URL: https://<IP Address>:4430/appliance/.
4. Click the Enable HTTPS Redirection checkbox to redirect HTTP to HTTPS when accessing the Analyzer management interface.
5. In the Public IP text-field, enter the public IP or FQDN of the outside web services.
6. When you are finished configuring the Web Server Settings, click the Update button.
The SMTP Configuration section allows you to configure an SMTP server name or IP address, a sender email address, and an administrator email address. You can test connectivity to the configured server.
To configure SMTP settings:
1. Navigate to the Deployment > Settings page under the SMTP Configuration section.
2. Type the FQDN or IP address of the SMTP server into the SMTP server field.
3. If the SMTP server in your deployment is set to use authentication, click the Use Authentication checkbox. This option is necessary for all outgoing Analyzer emails to properly send to the intended recipients. Enter the username in the User field, and enter/confirm the password in the Password and Confirm Password fields. This is the username/password that is used to authenticate against the SMTP server.
4. Type the email address from which mail will be sent into the Sender address field.
5. Type the email address of the system administrator into the Administrator address field.
6. To test connectivity to the SMTP server, click Test Connectivity.
7. To apply your changes, click Update.
The SSL Access Configuration section allows you to configure and upload a custom Keystore/Certificate file for SSL access to the GMS appliance, or select the default local keystore.
To configure SSL access:
1. Navigate to the Deployment > Settings page under SSL Access Configuration section.
2. Select the Default radio button to keep, or revert to, the default settings, where the default GMS Web Server certificate with 'gmsvpserverks' keystore is used.
3. Select the Custom radio button to upload a custom keystore certificate for GMS SSL access.
4. In the Keystore/Certificate file field, click the Browse button to select your certificate file.
Note Your custom file is renamed to ‘gmsvpservercustomks’ after upload.
5. Type the password for the keystore certificate into the Keystore/Certificate password field.
6. Click the View button to display details about your keystore certificate.
7. Click the Update button to submit your changes.