When you finish configuring the settings, click Accept to apply your WPA/WPA2 EAP settings.
From the Authentication Type drop-down menu, select either WPA-EAP, WPA2-EAP, or WPA2-AUTO-EAP.
From the EAPOL Version drop-down menu, select:
|
•
|
V1—Selects the extensible authentication protocol over LAN version 1.
|
|
•
|
V2—Selects the extensible authentication protocol over LAN version 2. This provides better security than version 1, but may not be supported by some wireless clients.
|
|
•
|
Cypher Type—Select TKIP. Temporal Key Integrity Protocol (TKIP) is a protocol for enforcing key integrity on a per-packet basis.
|
|
•
|
Group Key Update—Specifies when the Dell SonicWALL security appliance updates the key. Select By Timeout to generate a new group key after an interval specified in seconds; this is the default. Select Disabled to use a static key.
|
|
•
|
Interval—If you selected By Timeout, enter the number of seconds before WPA automatically generates a new group key. The default is 86400 seconds. If you selected Disabled for Group Key Update, this option is not displayed.
|
|
•
|
Radius Server Retries—Enter the number of authentication retries the server attempts. The default is 4.
|
|
•
|
Retry Interval (seconds)—Enter the delay the server is to wait between retries. The default is 0 (no delay).
|
|
•
|
Radius Server 1 IP and Port—Enter the IP address and port number for your primary RADIUS server.
|
|
•
|
Radius Server 1 Secret—Enter the password for access to Radius Server
|
|
•
|
Radius Server 2 IP and Port—Enter the IP address and port number for your secondary RADIUS server, if you have one.
|
|
•
|
Radius Server 2 Secret—Enter the password for access to Radius Server
|